More precision, more operating range
With moduversa plus you acquire additional movement space through its second, swivel arm. Within a radius of over two metres around the ceiling attachment point, you can accurately position the BSP 2500 supply system at any point in the room. This means that moduversa plus is the ideal solution if flexible working is requested and if concurrent horizontal movement of the supply unit is required.
The bearing and the electromagnetic braking system of moduversa plus enable the particularly light and precise positioning of the supply head. In this design moduversa plus is also maintenance-free and requires no compressed air, which makes the installation easier and saves additional costs.
moduversa plus is also available with a pneumatic braking system as a cost-effective alternative.
On request, moduversa plus may be also be designed as a tandem system.

Key Details
Electric specifications
Nominal voltage: 115 V - 240 V / 50-60 Hz - continuous operation
Protection class: I
Protection type: IP 20
Lighting technology indirect RGB lighting
Nominal voltage: DC 12 V
Available design option: From 800 mm arm length
Operating pressure of medical gas technology
Oxygen: 5 bar Compressed air: 5 bar
Compressed air: 8 bar Vacuum: - 0,8 bar
Laughing gas 5 bar CO2: 5 bar
AGSS: 5 bar Air-Motor: 8 bar
General information
Media current feed: From the top in the support arm
Braking system: Electromagnetic (optional compressed air)
Comfort option: Braking system with BrakeGuide* (optical feedback)
Total additional load of supply unit: Project-related
* BrakeGuide cannot be combined with compressed air brake
Support arm length
600 mm / 600 mm
600 mm / 800 mm
800 mm / 800 mm
800 mm / 1000 mm
1000 mm / 1000 mm
1200 mm / 1000 mm**
1200 mm / 1200 mm**
1400 mm / 1100 mm**
1400 mm / 1200 mm**
1600 mm / 1000 mm**
max. additional load support arm
300 kg / 530 kg*
260 kg / 470 kg*
220 kg / 390 kg*
190 kg / 330 kg*
170 kg / 300 kg*
150 kg / 270 kg*
130 kg / 240 kg*
240 kg*
200 kg*
200 kg*
* Max. additional load with XL-extension arm (optional)
** Not available with compressed air brake
HOT OFF THE PRESS, DIGITAL ONLY - OUR BROCHURES
moduversa – More precision, more operating range
Assembly, cleaning and maintenance
01. Assembly
The medical supply units and single-bed lighting fixtures can be installed and mounted on solid or plasterboard construction walls. Customer provided substructure is required for plasterboard walls. Project-specific substructures are used for ceiling-mounted supply units.
02. Cleaning
Our products can be cleaned with conventional cleaning agents and disinfected with alcohol-free disinfectants.
Surfaces are protected by high-quality electrostatic powder coating. Non-coated parts are made of anodized aluminium or chrome-nickel steel. All plastic parts are resistant to cleaning agents and disinfectants.
03. Maintenance & repair
The system must be maintained for the first time after 5 years and then after every 2 years. A contractual service agreement can be concluded for the maintenance work if required. More information can be found in the respective operating instructions.
04. Accessories
Our comprehensive range of accessories means you can set up your work area exactly as you want it. Consult our Accessories Catalogue to find out about the wide range of options available to you.
Your contact
Hendrik Balagny
Sales Director
Tel.: +49(0)2602/9449-31
Fax: +49(0)2602/9449-11
Mob: +49(0)176/10089108
E-Mail: hbalagny@modul-technik.de
„Good solutions start with listening. The direct connection to the customer is the key for me.“
