Everything you need comes from above
The ceiling-suspended moduflex 2500 supply system has been specifically developed for intensive care requirements. Because all media and apparatus attachments are fed from above, it enables optimum freedom of movement and perfect floor hygiene at the patient place.
Media are fed through ceiling columns which have a rear inspection opening. The tapping points for high and low voltage current, medical gases and other media are installed in the ceiling bars. The patient place is connected via the GW 2500 and IW 2500 apparatus carrier systems. Maintenance costs are also minimised through the rigid tubing up to the tapping points for medical gases.
We offer a wide equipment and accessory programme to match moduflex 2500 which allows the design of the entire work area to be customised. This includes catheter baskets, various examination lights, extension arms and drawers.
The system is also equipped with a lighting solution for indirect room lighting and a reading light.
GW 2500
The GW 2500 apparatus trolley is used as a carrier system for moduflex 2500 and the OP 3800 media bridge. Medical apparatus can be freely positioned along the height-adjustable consoles. The trolley is continuously braked by a manual friction brake.
IW 2500
The IW 2500 infusion trolley is the slim brother to the GW 2500 and incorporates all necessary equipment and accessories for infusion supplies.
Key Details
Electric specifications
Nominal voltage: 230 V - 240 V / 50 Hz - continuous operation
Protection class: I
Protection type: IP 20
Lighting technology
Nominal voltage: 230 V - 240 V / 50 Hz
Protection class: I
Connection type: Plug connection
Connection cross-section: 1.5mm² max.
Protection type: IP 20
Reading light (LED): Output ≙ 23 W
Reading light (T5 fluorescent tubes): Output ≙ 24 W / 2 x 24 W
Indirect lighting (LED): Output ≙ 64 W
Indirect lighting (T5 fluorescent tubes): Output ≙ 2 x 54 W
Night light (LED): Output ≙ 4.3 W
Operating pressure of medical gas technology
Oxygen: 5 bar
Compressed air: 5 bar
Vacuum: - 0,8 bar
CO2: 5 bar
AGSS: 5 bar
General information
Media current feed: From the top in the support columns
Additional load per apparatus trolley: Max. 120 kg
Optional light control: DALI DIM
Optional indirect RGB lighting: Output ≙ 3 x 39 W
HOT OFF THE PRESS, DIGITAL ONLY - OUR BROCHURES
moduflex 2500 – Everything you need comes from above
Assembly, cleaning and maintenance
01. Assembly
The medical supply units and single-bed lighting fixtures can be installed and mounted on solid or plasterboard construction walls. Customer provided substructure is required for plasterboard walls. Project-specific substructures are used for ceiling-mounted supply units.
02. Cleaning
Our products can be cleaned with conventional cleaning agents and disinfected with alcohol-free disinfectants.
Surfaces are protected by high-quality electrostatic powder coating. Non-coated parts are made of anodized aluminium or chrome-nickel steel. All plastic parts are resistant to cleaning agents and disinfectants.
03. Maintenance & repair
The system must be maintained for the first time after 5 years and then after every 2 years. A contractual service agreement can be concluded for the maintenance work if required. More information can be found in the respective operating instructions.
04. Accessories
Our comprehensive range of accessories means you can set up your work area exactly as you want it. Consult our Accessories Catalogue to find out about the wide range of options available to you.
Your contact
Günter Joas
Senior Project Manager
Tel.: +49(0)2602/9449-37
Fax: +49(0)2602/9449-11
Mobil: +49(0)171/3007813
E-Mail: gjoas@modul-technik.de
„To me, project management means creating structure, building trust, and delivering results.“
