Maximum flexibility in the OR
Just as moduversa HM, the motorised HM plus also has the soft start system for a smooth positioning in the room and the LED-supported electromagnetic braking system.
Thanks to its second horizontal arm moduversa HM plus offers even more flexibility in the exact positioning of the BSP 2500 supply head. More flexibility is not possible, especially since the maximum operating radius is approximately 2.6 metres around the ceiling mount.
Despite the additional joint, the maximum load capacity is more than sufficient for numerous medical devices, monitors, work tables and drawer blocks.
And by the way, all products in the moduversa range have been designed so they also retain their respective position in the event of power failures and can even be positioned by hand.
On request moduversa HM plus can also be configured as a tandem system or combined with other models in the moduversa range.

Key Details
Electric specifications
Nominal voltage: 115 V - 240 V / 50-60 Hz - continuous operation
Protection class: I
Protection type: IP 20
Lighting technology indirect RGB lighting
Nominal voltage: DC 12 V
Available design option: From 800 mm arm length
(upper extension arm)
Operating pressure of medical gas technology
Oxygen: 5 bar Compressed air: 5 bar
Compressed air: 8 bar Vacuum: - 0,8 bar
Laughing gas 5 bar CO2: 5 bar
AGSS: 5 bar Air-Motor: 8 bar
General information
Media current feed: From the top in the support arm
Braking system: Electromagnetic (optional compressed air)
Comfort option: Braking system with BrakeGuide* (optical feedback)
Total additional load of supply unit: Project-related
Height-adjustment: Electric motor
* BrakeGuide cannot be combined with compressed air brake
Support arm length
600 mm / 1000 mm
800 mm / 1000 mm
1000 mm / 1000 mm
1200 mm / 1000 mm**
1400 mm / 1000 mm**
1600 mm / 1000 mm**
Max. additional load support arm
150 kg / 250 kg*
150 kg / 250 kg*
150 kg / 250 kg*
140 kg / 250 kg*
140 kg*
200 kg*
* Max. additional load with XL-extension arm (optional)
** Not available with compressed air brake
HOT OFF THE PRESS, DIGITAL ONLY - OUR BROCHURES
moduversa – Maximum flexibility in the OR
Assembly, cleaning and maintenance
01. Assembly
The medical supply units and single-bed lighting fixtures can be installed and mounted on solid or plasterboard construction walls. Customer provided substructure is required for plasterboard walls. Project-specific substructures are used for ceiling-mounted supply units.
02. Cleaning
Our products can be cleaned with conventional cleaning agents and disinfected with alcohol-free disinfectants.
Surfaces are protected by high-quality electrostatic powder coating. Non-coated parts are made of anodized aluminium or chrome-nickel steel. All plastic parts are resistant to cleaning agents and disinfectants.
03. Maintenance & repair
The system must be maintained for the first time after 5 years and then after every 2 years. A contractual service agreement can be concluded for the maintenance work if required. More information can be found in the respective operating instructions.
04. Accessories
Our comprehensive range of accessories means you can set up your work area exactly as you want it. Consult our Accessories Catalogue to find out about the wide range of options available to you.
Your contact
Hendrik Balagny
Sales Director
Tel.: +49(0)2602/9449-31
Fax: +49(0)2602/9449-11
Mob: +49(0)176/10089108
E-Mail: hbalagny@modul-technik.de
„Good solutions start with listening. The direct connection to the customer is the key for me.“
